Looks rather good!
I need to change the bolts holding the cam pulleys in place but waiting for the postman...
posted by Toby Anscombe at
16:56
0 Comments
Monday, 29 December 2008
Cams are in...
Gratuitous shot of the cams and front plate installed.
For those of you who are doing this from the SC parts - make sure that you take the anodised finish off the inside of the pulleys BEFORE fitting them.
posted by Toby Anscombe at
16:54
0 Comments
Drain hoses
Here you can see the two hoses that I made up to drain the head. JIC -8 if anyone wants to know...
posted by Toby Anscombe at
16:53
0 Comments
Dry run of the belt
Dry run of the belt install. You can see that I have had to fudge the tensioner a little bit ;-)
Setting the timing via the lift on overlap was a real sod...
posted by Toby Anscombe at
16:51
0 Comments
Sunday, 28 December 2008
Links
Previous Posts
- Looks rather good!
- Job done!
- Cams are in...
- Drain hoses
- Dry run of the belt
- Workshop manuals
- Engine II
- Looking like a real engine
- Back plate
- Timing cover
Archives
- 30/12/07 - 06/01/08
- 06/01/08 - 13/01/08
- 10/02/08 - 17/02/08
- 17/02/08 - 24/02/08
- 20/07/08 - 27/07/08
- 14/09/08 - 21/09/08
- 28/09/08 - 05/10/08
- 12/10/08 - 19/10/08
- 19/10/08 - 26/10/08
- 26/10/08 - 02/11/08
- 21/12/08 - 28/12/08
- 28/12/08 - 04/01/09
Subscribe to
Posts [Atom]